DC12V LC8808 LED

DC12V LC8808 Individual Pixel LED

LC8808 is our new developed dc12v individual program controllable pixel LED chip,with our new circuit inside the led,it can work with the dc12v power supply directly,

so it can be easily used in the led lighting products,also can be use in many pcba as indicator lights.

It is 6pin 5050 smd led

Working power supply voltage: 12V

Output channel: 3 channels 

Signal: series (SPI)
Signal transmission method: return to zero code / breakpoint resume
Gray scale: 12bits

Controlling protocol:LC8808 or UCS1903Channel output current: 15mA
Product features: series LED constant current drive chip, return to zero code protocol, support breakpoint resume transmission function, unlimited cascade, single point single control, working voltage 12V.
Built-in GAMMA correction function, PWM refresh frequency 6KHz.

General Descriptions of LC8808 LED

The LC8808 is a 3-channel constant current LED drive with resumable data transfers and internal display patterns. There are three open-drain constant current outputs, with a build-in PWM of gray scale. The range of input power is from +9V to +15V, and voltage-endurance of LED port is +12V. There is a built-in 12bits GAMMA correction module. PWM maximum refresh frequency is 8kHz,The LC8808 use the e-RZ (extended return to zero code) as the signal transmission mode, which can control the output current channel by channel and cascade infinitely.LC8808 provides two-signal data input as redundant control, which ensures the transmission of the signal if any single chip damages. In the absence of signal input,LC8808 displays the built-in display patterns that is suitable for those applications without a controller. There is the built-in power-on and power-off protection in the drive, which can enhance the service life of the chip. It also has the automatic test function while power on, which is convenient for the customer to test,The LC8808 provides SOP8 packaging, working environment is from -40 ° C to + 85 ° C.

Kindly check the attached DC12V LC8808 LED Datasheet for more details

sk6805-2427 smallest digital rgb led chip

SK6805-2427 smallest digital rgb led chip

Introduction of SK6805-2427:

SK6805 2427 is one of the smallest digital rgb led chip for the moment,with the small size 2.4*2.7*1.1mm, it can be use to developed P3 HD led display,also can be the super narrow pcb strip lights with 3mm width pcb,also can be high density as high as 250 led/m led strips.With the milky gel inside the led,which is good for our eyes ,and can be friendly use for the children`s toys.The SK6805-2427 can be greatly increase the application of digital led lights.

1. Product Overview :

SK6805-2427 is a smart LED control circuit and light emitting circuit in one controlled LED source, D chip. Each lighting element is a pixel, and the intensities of the pixels are contained within the intelligent digital interface input. The output is driven by patented PWM technology, which effectively guarantees high consistency of the color of the pixels. The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator. The data protocol being used is unipolar NRZ communication mode. The 24-bit data is transmitted from the controller to DIN of the first element, and if it is accepted it is extracted pixel to pixel. After an internal data latch, the remaining data is passed through the internal amplification circuit and sent out on the DO port to the remaining pixels. The pixel is reset after the end of DIN. Using automatic shaping forwarding technology makes the number of cascaded pixels without signal transmission only limited by signal transmission speed. The LED has a low driving voltage (which allows for environmental protection and energy saving), high brightness, scattering angle, good consistency, low power, and long life. The control circuit is integrated in the LED above.

2. Main Application Field:

● Full color LED string light, LED full color module, LED super hard and soft lights, LED guardrail tube, LED appearance / scene lighting

● LED point light, LED pixel screen, LED shaped screen, a variety of electronic products, electrical equipment etc.. 3. Description:

● Top SMD internal integrated high quality external control line serial cascade constant current IC;

● control circuit and the RGB ch m a complete control of pixel, color mixing uniformity and consistency;

●built-in data shaping circuit, a pixel signal is received after wave shaping and output waveform distortion will not guarantee a line;

●The built-in power on reset and reset circuit, the power does not work;

●gray level adjusting circuit (256 level gray scale adjustable);

● red drive special treatment, color balance;

● line data transmission;

● plastic forward strengthening technology, the transmission distance between two points over 10M;

●Using a typical data transmission frequency of 800 Kbps, when the refresh rate of 30 frames per sec

SK6812 Side LED

SK6812 Side LED---Digital RGB Side Emitting LED

SK6812 side led is within sk6812 built-in ic,packaged with the R,G,B color chips iniide the 4020 smd led,it is individual addressable rgb side firing led chip, can achieve individual single pixel control,point by point scanning,reach magic RGB chasing,horse racing,gradual change and other color effects.

RGBWW+W 5in1 LED Chip

RGBWW+W 5in1 LED Chip

RGBWW+W 5in1 led is r,g,b,warm white and cool white color 5 color chips inside the 5050 smd led,one led have one rgb led strip function and two pure white led strips, can be achieve different color for different emotions ,rgb can be use as the holiday lighting for decoration,warm white and cool white can be use for normal lighting.

it can use as the lighting source for the led strips,led panels and so on.

Kindly check the link for more details about 5050 5in1 led chip.

digital rgb neon tube led light

digital rgb neon tube led light

Digital rgb neon light with colorful color change can be greatly in the decoration projects with high brightness and better color effect,here are our new product,DC5V/12V/24V low voltage flexible digital rgb pixel neon led lights:

Video about the ws2811 digital rgb led neon lights:

Our digital rgb neon tube flexible led light is using our low voltage (DC5V,12V,24V) digital rgb led strips as lighting source.the strips can be APA102,SK9822,SK6812,WS2813B,WS2811...

And the strip is inserted inside the neon tube as below picture:

The color effect is very uniform and high brightness..
 it is IP68 waterproof can be outdoor use.

WS2815 LED

DC12V WS2815 LED

WS2815 led is DC12V digital RGB smd led,all the component package inside the 5050 smd led. It also can be mini edition：WS2815-MINI LED.WS2815 breakthrough the limitation of digital rgb led just can be dc5v,and achieve the dc12v inidividual pixel rgb led,which can be greatly use in the lighting lamps,especially the dc12v digital rgb pixel strips.For it is DC12v,so the 2815 can effectively reduce the operating current of the entire pixel,and reduce the voltage drop in the circuit board , greatly ensure that the pixels in a very long distance transmission to achieve good blending consistency.but the PWM refresh frequency is just 2kHZ;

Pictures of WS2815 :

ws2815 application circuit：

Main Features

● Control circuit and RGB chips are integrated in one 5050 package components, constitute a complete external
control pixels.
● DC12V power supply,effectively reduce the working current of the whole pixel,lower PCB board’s voltage drop,
to the greatest extent Guarantee the pixels in a good mix of light consistency when long distance transmission.
● Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion accumulate of
waveform when signaling;
● Built-in signal shaping circuit, any one pixel point again after received signal waveform shaping output, ensure the
line waveform distortion does not accumulate;
● The gray levels of each pixel are of 256 levels, which achieves “256*256*256=16777216” full-color display, and
● Port refresh frequency reaches to 2kHZ;
● Serial cascade interface: data receiving and decoding depend on just one signal wire;
● Dual-signal wires version, additional one signal wire,signal break-point continuous transmission;
● Any two points’ transmission distance no more than 5m,there is no need to add any circuit;
● When the refresh rate is 30fps, cascade pixels are no less than 1024 pixels;
● Data transmitting at speeds of up to 800Kbps.
● Good color consistency reliability, high cost-effective.
Main Application
● LED Shoes light,Digital products,S style flexible strip,Architectural model,etc;
● LED curtain screen,LED pixel screen,LED Special-shaped screen;
General Description
WS2815-MINI is an intelligent control LED light source that the control circuit and RGB chip are integrated in a
package of 3535 components,outlook is the same as 5050 LED;Any components is a pixel;Its internal includes
intelligent digital port data latch and signal reshaping amplification drive circuit.Also include a precision internal
oscillator and a programmable constant current control part,which achieves highly consistent color effect.Realize double
signal transmission,if any pixel failure,it won’t affect the whole display;
The data transfer protocol use single NZR communication mode. After the pixel power-on reset, the DIN port
receive data from controller, the first pixel collect initial 24bit data then sent to the internal data latch, the other data
which reshaping by the internal signal reshaping amplification circuit sent to the next cascade pixel through the DO port.
After transmission for each pixel, the signal to reduce 24bit. Every pixel adopts auto-reshaping transmit technology,
making the pixel cascade numbers are not limited to the signal transmission, only relate to the speed of signal
transmission.
The BIN receives the data signal, and then compare the data with the DIN side after phagocytosis of 24bit data, if
DIN do NOT receive the signal, then switching to BIN for receiving the input signal, which ensure that any the IC's
damage does not affect the signal cascade transmission and make the BIN in state of receiving signal until restart after
power-off.
Refresh Frequency updates to 2KHz, Low Frame Frequency and no Flicker appear in HD Video Camera.
300us or more of reset time, it won’t cause wrong reset while interruption, it supports the lower frequency and

inexpensive MCU.

Mechanical Dimensions

PIN Configuration：

More details pls see the datasheet of WS2815

digital rgb side emitting addressable led strip ws2811

Digital rgb side emitting addressable led strip ws2811

   Our new developed digital RGB side emitting led strip is use the ws2811 ic as the color dimming controller,and the leds are individual RGB pixel leds (not R+G+B),it is DC5V 60led 020 addressable rgb per m,full color addressable which can be DMX console controlled, artnet converter controlled with software,such as the madrix,MadMapper...

WS2813 LED

WS2813 Signal Break-point Continuous Transmission LED

Refer to WS2813 LED, everyone may think of the ws2812b led,though they are all 3ch integrated digital rgb led (built-in ic led),but they have much different,firstly,ws2813 is dual-signal wire version in ws series leds,secondly the ws2813 have one more function:signal continuous transfer when there some break led,which can greatly improve the stability of the digital leds;the third one is tha the capacitance and resistance also package inside the led,this also will be much convenience for the pcb component designer,and reduce some SMT ,and save many space for other element.

General description
WS2813 LED is an intelligent control LED light source that the control circuit and RGB chip are integrated in a package
of 5050 components. Its internal include intelligent digital port data latch and signal reshaping amplification drive circuit.
Also include a precision internal oscillator and a 12V voltage programmable constant current control part,
which achieves highly consistent color effect.
The data transfer protocol use single NZR communication mode. After the pixel power-on reset, the DIN port receive
data from controller, the first pixel collect initial 24bit data then sent to the internal data latch, the other data which
reshaping by the internal signal reshaping amplification circuit sent to the next cascade pixel through the DO port. After
transmission for each pixel, the signal to reduce 24bit. Every pixel adopts auto-reshaping transmit technology, making
the pixel cascade numbers are not limited to the signal transmission, only relate to the speed of signal transmission.
The BIN receives the data signal, and then compare the data with the DIN side after phagocytosis of 24bit data, if DIN
do NOT receive the signal, then switching to BIN for receiving the input signal, which ensure that any the IC's damage
does not affect the signal cascade transmission and make the BIN in state of receiving signal until restart after power-off.
Refresh Frequency updates to 2KHz, Low Frame Frequency and no Flicker appear in HD Video Camera.
250us or more of reset time, it won’t cause wrong reset while interruption, it supports the lower frequency and
inexpensive MCU.
There’re in a choice of 18mA or 5mA current version, and also in a choice of high brightness or cost-effective version.

That is to say, WS2813 is provided with four versions

Features and Benefits
 The control circuit and the LED share the only power source.
 The control circuit and RGB chip are integrated in a 5050 components, to form an external control pixel.
 Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion of waveform of
signal takes place.
 Built-in power-on reset and brown-out reset circuits.
 The gray levels of each pixel are of 256 levels, which achieves “256*256*256=16777216” full-color display, and
the refresh frequency reaches to 2KHz/s.
 Serial cascade interface, data receiving and decoding depend on just one signal line.
 Dual-signal wires version, signal break-point continuous transmission.
 Any two point the distance more than 3m transmission signal without any increase circuit.
 When the refresh rate is 30fps, cascade numbers are far more than 1024 points.
 Data transmitting at speeds of up to 800Kbps.
 Good color consistency reliability, high cost-effective.
Applications
 Guardrail tube series, point light display series, flexible/rigid strips series, module series applications.
 Lighting stage costumes, innovative gadgets or any other electronic products.

Datasheet of WS2813 LED

http://www.led-color.com/upload/201604/WS2813 LED.pdf

SK9822 LED Chip

SK9822 LED Chip

SK9822 is a new type of IC for 3ch led chips` color dimming control,which has one double signal line-- the data cable and clock cable.After  a series of improvement design,it can well compatible with other two signal IC,and share the same controller system,

More details as below:

1. Product Overview :

SK9822 is a two-wire transmission channel three (RGB) driving intelligent control circuit and the light emitting circuit in one of the LED light source control. Products containing a signal decoding module, data buffer, a built -in constant current circuit and RC oscillator; CMOS, low voltage, low power consumption; 256 level grayscale PWM adjustment and 32 brightness adjustment; use the double output, Data and synchronization of the CLK signal, connected in series each wafer output action synchronization.

2. Main Application Field:

● Full color LED string light, LED full color module, LED super hard and soft lights, LED guardrail tube, LED appearance / scene lighting

● LED point light, LED pixel screen, LED shaped screen, a variety of electronic products, electrical equipment etc..

3. Description:

● Top SMD internal integrated high quality external control line serial cascade constant current IC; 5V application; default on electric lights;

● Control circuit and the RGB chip in SMD 5050 components, to form a complete control of pixel, color mixing uniformity and consistency;

● The two-wire synchronous control.

●The three RGB output control, 8Bit (256) color; 5Bit (32) to adjust the brightness;

● The three constant current drive, self detection function specific signal

● The maximum frequency of 30MHZ serial data input

● The double data transmission, built-in support uninterrupted oscillation PWM output, can maintain a static image.

sk9822 led solder pad

pin configuration of sk9822

series data structure

Addressable S Shape led strip

Addressable S Shape led strip

    Our dc5v sk6822 60led/m addressable s type led strip is using the sk6822 integrated led as the color lighting source,sk6822 has another advantage:one leds broken down,the signal still transfer will jump the broken IC and continue transfer,so the other ICs still work without any influencing.
 
   Digita RGB S Shape led strip is using flexible copper pcb with good ductility,as well as our creative idea for special shape of pcb. digital rgb S shape led strip not only can 360 degree bend,but also can be 90 degree twist,and it is easy installation,and suitable for the creative Art lighting and advertising word...
here are some pictures about it:

2835 constant current led strip

2835 constant current led strip

     Constant current led strip has its great advantage,for it is using the constant current IC(constant current transistor) in each group,so the current of the strip is almost the same,also the voltage of each group is the amost the same as the power supply without little voltage drop.

Each pcs of dc24v 2835 60led/m cc led strip can be as long as 25m with totally the same color,even as long as 50m when adding extra power on both side of the strips.

Our 2835 constant current led strip is dc24v safe low voltage with the long distance connection and 50000h lightspan,can be use to replace the high voltage led strip lights(high voltage is not so safe and just can be use in one year).

It is good choice for the led lighting projects with less power wire and easy installation.

UV LED: UVA 400~315nm,UVB 315~280nm,UVC 280~100nm

UV LED: UVA 400~315nm,UVB 315~280nm,UVC 280~100nm 

Ultraviolet LED Ultraviolet (UV) LED stands for ultraviolet light emitting diode. A UV LED is an electronic light source with electromagnetic radiation that has a wavelength shorter than that of visible light but longer than x-rays.The UV led has different wavelength which have special function.

we can divide the uv leds into three levels according to their wavelenght:

UVC (200~280nm),is shortwave UV or sterilization UV LED,

UVB (280~315nm),also known as the medium wave UV light,

UVA(315~400nm),Known as long wave violet light or "black light".

And great application in the area of curing,Disinfection,UV Attraction for the flying insects and so on,

The normal application of UV led can be summarized as follows:

 

1. Mosquoto killing 

2. plant growing

3. Counterfeit Detection/Security  

4. Printing 

5. Coating  

6. Crime Inspection 

7. UV torch 

8. Water Purification system 

9. Dental Curing 

10. Medical equipment 

11. Cosmetic equipment 

12. Leakage testing system 

13. Other required systems

Applications of germicidal 265nm uvc LED

Water Disinfection Application

Air Disinfection Application

Surfaces dinsinfection application